Blockboard

Products

Application

·Construction Use

·Exterior Use

·Interior Use

·Fumiture Use

Products Index

·Hardwood Plywood

> Film Faced Plywood

> Birch Plywood

> Pre-finished Plywood

> Die Boards Plywood

> Commercial Plywood

> Pine Plywood

> HPL (Fireproof) Plywood

> Transportation Plywood

> Molded & Curved Plywood

> Cabinet Plywood

> Transportation Plywood

> Chair Plywood

> 3 Ply Shuttering Panels

·Other Wooden Products

> Carpet Tack Strips

> Window & Door Scantlings

> Bed Slats and Frames

> Formwork I-Joists/ H20

> Blockboard

> Plywood Cable Reel

Tech Info

Documents

Home > Products > Blockboard

· Blockboard

Blockboard is made up of a core of wood strips. These strips may be up to about 25mm wide. The strips are placed edge to edge and sandwiched between veneers of hardwood. The sandwich is then glued under high pressure.

Thicknes (mm)	Size (mm)	Core
15	1220 x 2440	Poplar, Pine, Paulownia LC
18	1220 x 2440	Poplar, Pine, Paulownia LC

Block board is often made from rectangular strips of softwood glued and bonded together under high pressure. These strips are

then sandwiched between a wood veneer, such as birch. A single veneer on both sides is known as 3-ply. A double veneer on both

sides is called 5-ply. Block board is only suitable for interior work, as the glues used in its construction are not waterproof.

The boards should be stored flat as block board can twist or warp. If you decide to paint the surface, it is wise to paint both sides in

order to equalized the surface tensions, which will aid the shaping of the block board. Download Blockboard Brochure

BB/CC Grade for Face (Okoume)

Live Knots:----- 25.4mm max. diam

Dead Knots:----- None for BB, Well puttied & color matched for CC

Knotholes:----- 12.7mm max. diam. Puttied & color matched

Burls:----- Yes, Smooth

Color Variation:-----Very Slight

Stain & Mineral Streak:----- None for BB, Blending for CC

Dry Pitch & Bark Pockets:----- Well puttied & Color matched

Wormholes, Pinholes:----- 11 per 1M2, 32 per 1220 x 2440. 1.6mm max. diam, Puttied

Worm tracks:----- Filled linear hole 15.9mm max. well puttied

Vane Marks:----- Blending, Smooth

Cross Breaks:------ No, Hairline 50.8mm max. length

Doze:----- Firm, Slight, well Puttied, Blending

Core:Paulownia/Poplar/Combine

Voids:---- Max. 1.0mm, Over 1.0mm Shim repaired
Edge Core Strips:---- Min. 15mm wide, Min. 1 finger joint
Width of Core Strips:---- Max. 45mm
Length of Core Strips:---- Min. 150mm or 6 Pcs in row
Grain of Core Strips:----- Not mixed
Laps:---- No
Voids:---- Three Max. 3.2mm x 102mm, Not visible on face
End Splits:---- Yes, Not visible on the face
Uneven Core Thickness:---- No

Applications:

Decorative, shelves, doors, paneling and partitions

We can assist you with the selection of product for your specific needs. Please Contact us.

CANEX Plywood